-- *******************************************************************
-- CISCO-DOT11-CONTEXT-SERVICES-MIB.my:
-- May 2003, Raju Datla, Parthasarathy Venkatavaradhan,
-- Prasanna Viswakumar.
--
-- Copyright (c) 2003 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
--CISCO-DOT11-CONTEXT-SERVICES-MIB DEFINITIONS::=BEGINIMPORTSNOTIFICATION-TYPE,MODULE-IDENTITY,OBJECT-TYPE,Counter32,Gauge32,Unsigned32FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
MacAddress,TruthValue,RowStatus,TimeInterval,TimeStamp,TEXTUAL-CONVENTIONFROM SNMPv2-TC
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
CiscoInetAddressMask
FROM CISCO-TC
ciscoExperiment
FROM CISCO-SMI
InterfaceIndex,ifPhysAddress
FROM IF-MIB
InetAddressType,InetAddressFROM INET-ADDRESS-MIB;ciscoDot11ContextServicesMIB MODULE-IDENTITYLAST-UPDATED"200309150000Z"ORGANIZATION"Cisco Systems Inc."CONTACT-INFO" Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-dot11@cisco.com"DESCRIPTION"This MIB supports managing the devices offering
WDS and WNS services.
The hierarchy of the devices offering the wireless
domain and network services looks like the following.
+= = = = +
| |
| WNS | (Campus level)
| |
+= = = = +
/ \
/ \
/ \
/ \
\/ \/
+= = =+ += = =+
| | | |
| WNS | | WNS |
| | | |
+= = =+ += = =+
/ \ \
/ \ \
/ \ \
/ \ \
\/ \/ \/
+=====+ +=====+ +=====+
| | | | | |
| WDS | | WDS | | WDS | ( Subnet
| | | | | | level-
+=====+ +=====+ +=====+ Single
/ \ \ \ broadcast
/ \ \ \ domain )
/ \ \ \
/ \ \ \
/ \ \ \
\/ \/ \/ \/
+~-~-~+ +~-~-~+ +~-~-~+ +~-~-~+
+ + + + + + + +
+ AP + + AP + + AP + + AP +
+ + + + + + + +
+~-~-~+ +~-~-~+ +~-~-~+ +~-~-~+
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
\/ \/ \/ \/ \/
+.....+ +.....+ +-.-.-.+ +~-~-~+ +......+
+ + + + + + + + + +
+ MN + + MN + + WGB + + AP + + MN +
+ + + + + + + + + +
+.....+ +.....+ +-.-.-.+ +~-~-~+ +......+
. . .
. . .
. . .
. . .
\/ \/ \/
++++++++ +......+ +......+
+ + + + + +
+ EN + + MN + + MN +
+ + + + + +
++++++++ +......+ +......+
The diagram above depicts the overall campus network
hierarchy and the services being offered at various
levels in the hierarchy. Here, Infrastructure Node
Authentication services are offered by the device
providing WNS at the root (Campus) level. WNS
at this level thus span an enterprise campus that
resides in a geographic location.
WNS are offered at various levels as shown in the
hierarchy to achieve scalability. WNS at the
subsequent levels other than the root level include
authentication services for MNs and are typically
confined to a single building.
At the broadcast domain level, the WDS include
authentication and registration services for the APs.
An AP provides Proxy Authentication and registration
services for the MNs. The APs that connect to parent
APs through the wireless interface ( as shown by the
dotted lines ) are Repeater-APs. The WGBs are managed
in the same manner as the MNs. However, the Ethernet
Nodes ( EN ) that are connected to the WGB won't be
served as part of the WDS.
GLOSSARY
Access Point ( AP )
Any entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
Wireless Bridge
An 802.11 entity that provides wireless connectivity
between two wired LAN segments and is used in point-
to-point or point-multipoint configurations.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
WorkGroup Bridge ( WGB )
A work-group bridge is a non-STP AP with an 802.11
primary port and a secondary Ethernet port that
provides access to a non-STP secondary Ethernet LAN
segment. STP refers to the IEEE 802.1D Spanning Tree
Protocol. An 'STP AP' executes the 802.1D STP and
the 802.1D STP is operated on an 'STP link'. A
'non-STP AP' does not execute the 802.1D STP.
Repeater-AP
A repeater is a 'wireless AP' that is attached to a
parent AP on an 802.11 primary port. The Ethernet
port is disabled in a Repeater-AP.
Infrastructure Node ( IN )
This term refers to Access Points, Wireless Bridges
and those devices that implement and offer WNS and
WDS as shown in the network hierarchy.
Ethernet Node ( EN )
The node that gets the uplink to the Wireless AP
via the WGB. This node connects to the WGB through
its primary Ethernet port.
Context
The mobility context for an MN includes its current
mobility bindings with the APs, IP/802 address
bindings, cached configuration parameters, QoS state,
IP group membership, authentication state, accounting
statistics, and other dynamically derived protocol
state information.
Wireless Domain Services
The set of services being offered at a particular
broadcast domain that may be an IP subnet or a
particular VLAN. The services include the following.
1. MN security credential caching to provide seamless,
secure intra-subnet roaming.
2. Authenticated context transfer for roaming client
within the subnet.
Since, by definition, the WDS are bound to one subnet
( broadcast domain ), if implemented in a device
spanning multiple subnets, the implementation should
take care to provide separate set of services for
each of the subnets.
Wireless Network Services
The set of services that can be visualized as being
offered at various levels other than the lowest
(subnet) level of a hierarchical campus network.
At the root level, Infrastructure Authentication
services for all the devices in the network that
provide WNS and WDS are offered. In case if WNS are
not distributed at several levels as shown in the
hierarchy above and is confined to be offered only at
a single root level, the services offered also
include authentication services for the MNs.
WNS Entity
The logical entity that resides in an infrastructure
node and offers WNS to the descendants of that
infrastructure node in the wireless services
hierarchy.
WDS Entity
The logical entity that resides in an infrastructure
node and offers WDS to the descendants of that
infrastructure node in the wireless services
hierarchy.
WS Entity
Refers to one of WNS / WDS Entities.
Parent Node
The node that immediately precedes an infrastructure
node in the hierarchy. For mobile nodes, the parent
APs provide proxy wireless services by talking to
their immediate parent nodes that offer WDS.
Root Node
The infrastructure node that is at the highest level
in the services hierarchy and that offers WNS.
The WNS entity acts as the IN Authenticator
for the rest of the infrastructure nodes. In case if
WNS are not distributed, the root node also acts as
the Mobile Node Authenticator ( See description
below ).
Descendant
A node that is in the sub-tree of the campus hierarchy
tree rooted at the node providing WNS.
Infrastructure Node ( IN ) Authenticator
The logical entity that communicates with the AAA
server and provides authentication Services for the
infrastructure nodes. Details of the IN
Authenticator have to be configured in the device
providing WDS manually. The AP learns about the IN
Authenticator automatically upon registering with its
immediate parent. The WDS also includes MN
authentication services if the entity providing WDS is
at the root level in the hierarchy.
Mobile Node ( MN ) Authenticator
The logical entity that communicates with the AAA
server and provides authentication Services for mobile
nodes. An infrastructure node learns the whereabouts
of the MN Authenticator from the root node.
Wireless Network Manager ( WNM )
The network management system that manages the
entire hierarchy of devices providing WNS and WDS.
Advertisement
The process by which the Access Points identify their
parent nodes providing WDS. APs listen to the
advertisements of the WDS entities and gets registered
with one of those entities to facilitate secured
context transfer.
WLCCP
Wireless LAN Context Control Protocol. Used to
establish and manage the network topology and
securely manage the 'operational context' for mobile
stations in a campus network.
AAA
Authentication, Authorization, Accounting
A node will request network access by executing a
protocol to an authentication server that provides
protocols and services for providing authentication,
authorization and session accounting.
Service Set Identifier ( SSID )
802.11 Service Set Identifier. An SSID identifies a
set of mobile nodes grouped into a logical 'service
set' and the APs that provide access for the service
set.
Wired Equivalent Privacy (WEP)
This protocol uses a pseudo random generator and RC4
stream cipher and is specified by the 802.11 standard
as the algorithm for encryption and authentication
over the wireless segment of the LAN.
Temporal Key Integrity Protocol ( TKIP )
This protocol provides initialization vector hashing
and a Message Integrity Check ( MIC ) to ensure data
integrity. TKIP includes use of dynamic keys to
defeat capture of passive keys. TKIP uses the RC4
cipher as WEP but the difference is that TKIP changes
temporal keys every 10,000 packets thereby providing a
dynamic distribution network that enhances the
security of the network.
Cisco Key Integrity Protocol ( CKIP )
A proprietary implementation similar to TKIP. CKIP
implements key permutation for protecting the CKIP
key against attacks. Other features of CKIP include
expansion of encryption key to 16 bytes of length for
key protection and MIC to ensure data integrity.
Wireless services at subnet level
=================================
+========+
| |
| WDS | ( Subnet level - Broadcast
| | domain )
+========+
/ \
/ \
/ \
/ \
/ \
\/ \/
+~-~-~+ +~-~-~+
+ + + +
+ AP + + AP +
+ + + +
+~-~-~+ +~-~-~+
. . .
. . .
. . .
. . .
. . .
. . .
\/ \/ \/
+......+ +-.-.-.+ +~-~-~-+
+ + + + + +
+ MN + + WGB + + AP +
+ + + + + +
+......+ +-.-.-.+ +~-~-~-+
The above diagram depicts how wireless services are
being offered in an infrastructure node implementing
WDS. In such a network, the WDS entity provides
authentication services to both the infrastructure
and mobile nodes.
The other entities in the diagram are the Mobile Node
( MN ), the Workgroup Bridge (WGB) and another
AP-in-repeater mode. The Repeater-APs first perform
initial authentication with the AAA server ( through
WDS ) and then perform infrastructure authentication
and registration with the WDS entity. The WGBs go
through the same procedure as the MNs for
authentication and registration with the WDS entity. "REVISION"200309150000Z"
DESCRIPTION"Initial version of this MIB module. "::={ ciscoExperiment 110}ciscoDot11csMIBNotifications OBJECTIDENTIFIER::={ ciscoDot11ContextServicesMIB 0}ciscoDot11csMIBObjects OBJECTIDENTIFIER::={ ciscoDot11ContextServicesMIB 1}ciscoDot11csMIBConformance OBJECTIDENTIFIER::={ ciscoDot11ContextServicesMIB 2}cDot11csConfigGlobal OBJECTIDENTIFIER::={ ciscoDot11csMIBObjects 1}cDot11csDescendantIn OBJECTIDENTIFIER::={ ciscoDot11csMIBObjects 2}cDot11csMn OBJECTIDENTIFIER::={ ciscoDot11csMIBObjects 3}
-- Textual ConventionsCDot11csNodeIndex ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"This textual convention defines an identifier that is
used to uniquely identify a WS Entity in the wireless
services hierarchy. "SYNTAXOCTETSTRING(SIZE(8))--********************************************************************
--* Configuration global parameters
--********************************************************************cDot11csServiceType OBJECT-TYPESYNTAXINTEGER{none(1),wds(2),wns(3),rootWns(4)}MAX-ACCESSread-write
STATUScurrentDESCRIPTION"This object identifies the type of service
this infrastructure node will offer.
none(1) - This infrastructure node is not
configured to offer any services.
wds(2) - This infrastructure node is configured
to offer Wireless Domain Services.
To configure this infrastructure node to
offer Wireless Domain Services, cDot11csServiceType
should be set to 'wds' and an entry should be
added to cDot11csWdsInstanceTable to specify the
configuration for the WDS.
wns(3) - This infrastructure node is configured
to offer Wireless Network Services.
To configure this infrastructure node to
offer Wireless Network Services, cDot11csServiceType
should be set to 'wns' and
cDot11csPrimaryRootNodeAddr should be set to the IP
address of the root infrastructure node that
offers WNS.
rootWns(4) - This infrastructure node is configured
to offer Wireless Network Services at the root
level in the wireless services hierarchy.
To configure an infrastructure node as the root
node, cDot11csServiceType should be set to
'rootWns' and cDot11csPrimaryRootNodeAddr should be
set to 0.0.0.0 to imply that this infrastructure
node is the root node in the wireless services
hierarchy. "DEFVAL{ none }::={ cDot11csConfigGlobal 1}cDot11csParentNodeIpAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the type of Internet address stored in
cDot11csParentNodeIpAddress. "::={ cDot11csConfigGlobal 2}cDot11csParentNodeIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP address of the immediate parent node of
this infrastructure node in the wireless services
hierarchy. The semantics for this object are defined
as follows.
If the value of cDot11csServiceType is 'rootWns' and
the value of this object is 0.0.0.0, then this node
is the root node offering WNS.
If the value of cDot11csServiceType is 'wns', the
value of this object is the IP address of the root
infrastructure node offering WNS.
If the values of cDot11csServiceType,
cDot11csIsRootNode and this object are 'wds', 'true'
and 0.0.0.0 respectively, then this node is the root
node in the wireless services hierarchy.
If the values of cDot11csServiceType and
cDot11csIsRootNode are 'wds' and 'false' respectively,
the value of this object is the IP address of the
immediate parent infrastructure node. "::={ cDot11csConfigGlobal 3}cDot11csPrimaryRootNodeAddrType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the type of Internet address stored in
cDot11csPrimaryRootNodeAddr. "::={ cDot11csConfigGlobal 4}cDot11csPrimaryRootNodeAddr OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"The IP address of the infrastructure node to be
configured as the primary root node. The primary
root node performs infrastructure authentication
for all the infrastructure nodes in the
wireless services network.
The semantics for this object are defined as
follows.
If the value of cDot11csServiceType is 'wds' and this
infrastructure node is the root node in the wireless
services hierarchy, the value configured is
0.0.0.0 to indicate that this node is the root node
in the wireless services hierarchy.
If the value of cDot11csServiceType is 'wds' and this
infrastructure node is not the root node in the
wireless services hierarchy, the value configured is
the IP address of the infrastructure node for which
the value of cDot11csServiceType is 'rootWns'.
If the value of cDot11csServiceType is 'wns', the
value configured is the IP address of the
infrastructure node for which the value of
cDot11csServiceType is 'rootWns'.
If the value of cDot11csServiceType is 'rootWns', the
value 0.0.0.0 is configured to indicate that this
infrastructure node is the root node in the wireless
services hierarchy. "::={ cDot11csConfigGlobal 5}
cDot11csSecondaryRootNodeAddrType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the type of Internet address stored in
cWSSecondaryRootNodeAddr. "::={ cDot11csConfigGlobal 6}cDot11csSecondaryRootNodeAddr OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The IP address of the Secondary root node acting as
a standby for the primary root node. The semantics
for this object are defined as follows.
If the values of cDot11wsServiceType,
cDot11wsIsRootNode and this object are 'wds', 'true'
and 0.0.0.0 respectively, then there is no
secondary root node in the wireless hierarchy.
If the values of cDot11wsServiceType and
cDot11wsIsRootNode are 'wds' and 'false'
respectively, then the value of this object is the
IP address of an infrastructure node that acts as a
backup for the current root node.
If the value of cDot11wsServiceType is 'wns', the
value of this object is the IP address of an
infrastructure node that acts as a backup for the
current root node.
If value of cDot11wsServiceType is 'rootWns', the
value of this object is the IP address of an
infrastructure node that acts as a backup for the
current root node. "::={ cDot11csConfigGlobal 7}cDot11csCurrentRootNodeAddrType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the type of Internet address stored in
cDot11csCurrentRootNodeAddr. "::={ cDot11csConfigGlobal 8}cDot11csCurrentRootNodeAddr OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP address of the infrastructure node that is
currently the root node.
This object's value is 0.0.0.0 if this infrastructure
node is the root node. Else, this object's value is
the IP address of the root node.
Thus, the object's value is 0.0.0.0 if either one
of the following is true.
1) this infrastructure node offers WDS and is the
root node.
2) this infrastructure node offers WNS with the
value of cDot11csServiceType equal to 'rootWns'.
The object's value is the IP address of the root node
if the value of cDot11csServiceType is 'wns' for this
node. "::={ cDot11csConfigGlobal 9}cDot11csWnsEntityName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The name associated with the WNS being offered by
this infrastructure node. This name is unique
across the wireless services network at the campus
level. This is applicable only if the infrastructure
node offers WNS. This object is not applicable for
read-write operations, if this is an infrastructure
node offering WDS. "::={ cDot11csConfigGlobal 10}cDot11csMnaIpAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the type of Internet address stored in
cDot11csMnaIpAddress. "::={ cDot11csConfigGlobal 11}cDot11csMnaIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP address of the Mobile Node Authenticator.
The semantics for this object are defined as follows.
If the value of cDot11csServiceType,
cDot11csIsRootNode and this object are 'wds', 'true'
and 0.0.0.0 respectively, this node is the MN
Authenticator.
If the values of cDot11csServiceType is 'wds' and the
value of cDot11csIsRootNode is 'false' indicating that
there is at least one node up in the wireless services
hierarchy that offers Wireless Network Services, the
value of this object is the IP address of the
immediate parent node for which the value of
cDot11csServiceType is 'wns'.
If the values of cDot11csServiceType and this object
are 'wns' and 0.0.0.0 respectively, this
infrastructure node is the MN Authenticator.
This object is not applicable to a root node offering
WNS which is identified by a value of 'rootWns' for
cDot11csServiceType. "::={ cDot11csConfigGlobal 12}cDot11csIsRootNode OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates if this infrastructure node is
the root node. If the value of this object is
'true', this node is the root node. "::={ cDot11csConfigGlobal 13}cDot11csNodeOperationMode OBJECT-TYPESYNTAXINTEGER{
adminStandAlone(1),infrastructure(2),fallbackStandAlone(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the mode which this
infrastructure node is currently operating in.
The semantics are described as follows.
adminStandAlone - An infrastructure node in this
mode has been configured to be the highest level node
in the wireless services hierarchy and acts as both
the Infrastructure and Mobile Node Authenticator.
For an infrastructure node for which
cDot11csServiceType is configured as 'rootWns', the
mode of operation is always 'adminStandAlone' as it
is the highest level node in the wireless services
hierarchy. An infrastructure node whose
cDot11csServiceType is 'wds' can be in
'adminStandAlone' mode if there is no node offering
Wireless Network Services and is the root node in
the wireless services hierarchy. An infrastructure
node for which the value of cDot11csServiceType is
'wns' can't be in 'adminStandAlone' mode since it
always has another infrastructure node as its parent
for which the value of cDot11csServiceType is
'rootWns' and won't be the root node in the wireless
services hierarchy.
infrastructure - An infrastructure node in this
mode has been configured with an external IN
Authenticator. The external IN Authenticator
in this case is the infrastructure node whose value
of cDot11csServiceType is 'rootWns'. The immediate
parent of this infrastructure node is given by the
object cDot11csParentNodeAddress.
fallbackStandAlone - This infrastructure node has
been configured to function in the 'infrastructure'
mode but the node has dropped back to
'fallbackStandAlone' mode due to loss of
communication with its parent node. From an
operational point of view, 'fallbackStandAlone' mode
is same as 'adminStandAlone' mode. However, in the
'fallbackStandAlone' mode, an infrastructure node
continuously attempts to get back to the
'infrastructure' mode. "::={ cDot11csConfigGlobal 14}cDot11csWnsTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11csWnsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table holds the information about the subnets
that are bound to each WNS entity. This WNS-to-WDS
mapping is configured in the root WNS entity. A WDS
entity requests the root WNS entity for the parent
WNS entity.
This table is applicable only for a root node.
A row is added to this table in the root WNS entity
by the administrator through the WNM, each row
holding information about one particular subnet that
is being served by a WNS entity. The name of the
WNS entity is given by the object
cDot11csWnsEntityName. "::={ cDot11csConfigGlobal 15}cDot11csWnsEntry OBJECT-TYPESYNTAX CDot11csWnsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry corresponds to one WDS-to-WNS mapping
configured in the root WNS entity. "INDEX{ cDot11csWnsIndex,
cDot11csWnsAddrType,
cDot11csWnsSubnetAddr }::={ cDot11csWnsTable 1}
CDot11csWnsEntry ::=SEQUENCE{
cDot11csWnsIndex SnmpAdminString,
cDot11csWnsAddrType InetAddressType,
cDot11csWnsSubnetAddr InetAddress,
cDot11csWnsSubnetMask CiscoInetAddressMask,
cDot11csWnsRowStatus RowStatus}cDot11csWnsIndex OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The name of the WNS entity that serves a given set
of subnets. This object holds the value configured
in cDot11csWnsEntityName. "::={ cDot11csWnsEntry 1}cDot11csWnsAddrType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Represents the type of Internet addresses stored in
cDot11csWnsSubnetAddr and cDot11csWnsSubnetMask. "::={ cDot11csWnsEntry 2}cDot11csWnsSubnetAddr OBJECT-TYPESYNTAXInetAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The address of the subnet configured to be served
by the WNS entity identified by cDot11csWnsIndex. "::={ cDot11csWnsEntry 3}cDot11csWnsSubnetMask OBJECT-TYPESYNTAX CiscoInetAddressMask
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The subnet mask associated with the subnet address
given by cDot11csWnsSubnetAddr. "
::={ cDot11csWnsEntry 4}cDot11csWnsRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status column used for creating and deleting
instances of the columnar objects in the
cDot11csWnsTable.
The following information must be provided by the
WNM while creating a row.
The subnet address (cDot11csWnsSubnetAddr), the
subnet mask ( cDot11csWnsSubnetMask) and
Row Status ( cDot11csWnsRowStatus)
The type of the addresses stored by the subnet
address and the subnet mask should also be
specified.
The row, when created with the row status value
of 'createAndGo' is moved to the 'active' state
automatically by the agent and remains in that state
till the time the row is removed through the
'destroy' option. This is used to create an entry
for a new subnet that is assigned to be serviced by
a WNS entity.
The 'destroy' option is used when the administrator
decides to remove the row representing a particular
subnet being served by a WNS entity. "
::={ cDot11csWnsEntry 5}cDot11csWnmConfigTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11csWnmConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table holds the list of IP addresses of those
WNMs that have been identified as recipients of the
notifications sent by a WS entity. In case of
multiple WDS entities running in a single box, this
table is common across all the WDS entities.
Notifications are sent to those WNMs in this table
whose cDot11csConfigWnmAuthenState value is
'authenticated'. A row is added to this table by
the administrator through the WNM to specify a
particular instance of WNM as a recipient of the
notification sent by a infrastructure node
configured to offer WDS/WNS. "::={ cDot11csConfigGlobal 16}cDot11csWnmConfigEntry OBJECT-TYPESYNTAX CDot11csWnmConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"An entry corresponds to one WNM instance that is
identified as a recipient of the notifications
sent by an infrastructure node configured to provide
wireless services. "INDEX{ cDot11csWnmConfigIpAddressType,
cDot11csWnmConfigIpAddress }::={ cDot11csWnmConfigTable 1}
CDot11csWnmConfigEntry ::=SEQUENCE{
cDot11csWnmConfigIpAddressType InetAddressType,
cDot11csWnmConfigIpAddress InetAddress,
cDot11csWnmConfigAuthenState INTEGER,
cDot11csWnmConfigRowStatus RowStatus}cDot11csWnmConfigIpAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Represents the type of Internet address stored in
cDot11csWnmConfigIpAddress. "::={ cDot11csWnmConfigEntry 1}cDot11csWnmConfigIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The IP address of this WNM. "::={ cDot11csWnmConfigEntry 2}cDot11csWnmConfigAuthenState OBJECT-TYPESYNTAXINTEGER{unauthenticated(1),authenticationInProgess(2),authenticationFailed(3),authenticated(4),keysSetUpWithWds(5)}MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The semantics for this object are defined as follows.
unauthenticated - The WNM hasn't initiated the
authentication process yet.
authenticationInProgress - The WNM has initiated the
the authentication process to get authenticated with
the WS entity and the process is currently underway.
authenticationFailed - The WNM has failed to get
authenticate successfully with the WS Entity.
authenticated - The WNM has got authenticated with
the WS entity and established a mutual trust
relationship with the same.
keysSetUpWithScm - The WNM has got authenticated
with the WS Entity and set secret keys for securing
the communication with the WS Entity.
The WNM initiates authentication process only with
an 'active' WDS entity. (The state of the WDS
entity is given by the object
cDot11csWdsInstanceState). Hence, all the
authentication states other than 'unauthenticated'
are valid only for an 'active' WDS entity. Also,
the 'active' WDS entity ( the entity for which the
the value of cDot11csWdsInstanceState is 'active )
has to be configured with the address of the WNM
before the WNM initiates the authentication process.
The value is always 'unauthenticated' for a
WDS entity in 'backup' state. "::={ cDot11csWnmConfigEntry 3}cDot11csWnmConfigRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status column used for creating and deleting
instances of the columnar objects in
cDot11csWnmConfigTable.
The administrator must specify the following
information while creating a row.
The IP address type (cDot11csWnmConfigIpAddressType)
The IP address of the WNM
(cDot11csWnmConfigIpAddress)
The Row status ( cDot11csWnmConfigRowStatus )
The row, when created, is automatically set to active
by the agent as indicated by 'createAndGo' and
remains in that state till the time the row is
removed through the 'destroy' option.
The administrator should manually remove a row
from this table to remove a WNM instance from the
list of notification recipients.
The 'createAndGo' option is used to create an entry
to configure a particular WNM as one of the
recipients of the notifications sent by a WS entity
configured in an infrastructure node.
The 'destroy' option is used when the administrator
decides to remove this WNM from the list of
notification recipients for a WS entity. "::={ cDot11csWnmConfigEntry 4}cDot11csWdsInstanceTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11csWdsInstanceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the list of WDS entities
currently configured in this device on each of the
logical interfaces/VLANs. This table is applicable
only if the value of cDot11csServiceType is 'wds'.
Before adding a row to this table, the object
cDot11csServiceType should have been set to 'wds'.
The table is indexed by cDot11csWdsInstanceIndex.
The object cDot11csWdsInstanceNodeIndex is an
internally generated unique value and so it can't be
specified at the time of creating of row. Hence it
has been made a read-only object.
A row is added to this table to associate a WDS
entity with one of the logical interfaces/VLANs
configured in this device. "::={ cDot11csConfigGlobal 17}
cDot11csWdsInstanceEntry OBJECT-TYPESYNTAX CDot11csWdsInstanceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry represents a WDS entity currently associated
with one of the logical interfaces/VLANs configured
in this device. "INDEX{ cDot11csWdsInstanceIndex }::={ cDot11csWdsInstanceTable 1}
CDot11csWdsInstanceEntry ::=SEQUENCE{
cDot11csWdsInstanceIndex Unsigned32,
cDot11csWdsInstanceNodeIndex CDot11csNodeIndex,
cDot11csWdsInstanceInterfaceIndex InterfaceIndex,
cDot11csWdsInstancePriority Unsigned32,
cDot11csWdsInstanceState INTEGER,
cDot11csWdsInstanceRowStatus RowStatus}cDot11csWdsInstanceIndex OBJECT-TYPE
SYNTAXUnsigned32(1..512)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object identifies this entry corresponding to a
particular WDS entity in the infrastructure node. "::={ cDot11csWdsInstanceEntry 1}cDot11csWdsInstanceNodeIndex OBJECT-TYPESYNTAX CDot11csNodeIndex
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the node identifier of this
WDS entity. "::={ cDot11csWdsInstanceEntry 2}cDot11csWdsInstanceInterfaceIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-createSTATUScurrentDESCRIPTION
"This object specifies the ifIndex corresponding to
the interface / VLAN which this WDS entity is
bound to. "::={ cDot11csWdsInstanceEntry 3}cDot11csWdsInstancePriority OBJECT-TYPESYNTAXUnsigned32(1..255)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the priority value being
configured by the administrator for this WDS entity.
Based on the priority value, a WDS entity candidate
gets elected as the active WDS. 1-127 are typically
used for backup WDS candidates and 128 to 255 are
typically used for primary WDS candidates. "::={ cDot11csWdsInstanceEntry 4}cDot11csWdsInstanceState OBJECT-TYPESYNTAXINTEGER{active(1),backup(2),
candidate(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the current state of this WDS
entity.
A value of 'active' indicates that this is an active
WDS entity that sends periodic WDS advertisement
messages for APs to pick those messages and identify
the WDS entity they can register with. An 'active'
WDS entity moves to the 'backup' state if it receives
advertisement message from a WDS entity configured
with a higher priority.
A value of 'backup' indicates that this WDS entity
is in standby mode. A 'backup' WDS entity moves to
the 'active' state when it receives advertisement
message from a WDS entity configured with a higher
priority.
The 'candidate' state is the initial state of a WDS
entity that participates in the election process.
A WDS candidate entity moves either to the 'active'
state if it doesn't receive an advertisement message
from a higher priority WDS entity within the listen
period or to the 'backup' state if it receives a
higher priority advertisement message within the
listen period. "::={ cDot11csWdsInstanceEntry 5}cDot11csWdsInstanceRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status column used for creating, modifying, and
deleting instances of the columnar objects in the
cDot11csWdsInstanceTable.
The administrator must specify the following
to create a row in this table and activate it.
1) The ifIndex of the interface / VLAN this WDS
entity should bound to.
2) The Priority value of the WDS entity to be
created through the object
cDot11csWdsInstancePriority.
3) The Row status through the object
cDot11csWdsInstanceRowStatus.
The 'createAndGo' option is used to create a new
instance of WDS entity and bind it to a particular
broadcast domain which can either be an IP subnet or
a VLAN. While creating a row, the ifIndex of the
interface the particular IP subnet/VLAN is bound to
and the priority of this WDS entity must be
specified along with the row status.
The 'destroy' option is used when the administrator
decides to decommission a particular WDS entity and
remove its bindings with a particular broadcast
domain. A row in this table is destroyed when it is
in the 'active' state. The ifIndex of the interface
the particular IP subnet/VLAN is bound to must be
specified along with the row status set to 'destroy'
to remove a row from cDot11csWdsInstanceTable. "::={ cDot11csWdsInstanceEntry 6}cDot11csStatusTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11csStatusEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides information about the status of
wireless service entities currently being configured
in this device. "::={ cDot11csConfigGlobal 18}cDot11csStatusEntry OBJECT-TYPESYNTAX CDot11csStatusEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry provides information about the entity
currently offering wireless services and associated
with one of the logical interfaces/VLANs configured
in this device.
For a WDS entity bound to a logical interface/VLAN,
a row is added to this table whenever an entry for
a WDS entity is added to cDot11csWdsInstanceTable
with cDot11csWdsInstanceState set to 'active'. The
administrator can't create rows in this table but he
can select and temporarily bring the services being
provided by one entity to its descendants down by
setting the value of cDot11csStatusAdminStatus to
'down'.
If the entity provides WNS, this table contains a
single row.
A row is deleted from this table automatically
when one of the following occurs.
1) A WDS entity is decommissioned by destroying the
row corresponding to the same in the
cDot11csWdsInstance Table.
2) The wireless services are shut down internally. "INDEX{ cDot11csStatusNodeIndex }::={ cDot11csStatusTable 1}
CDot11csStatusEntry ::=SEQUENCE{
cDot11csStatusNodeIndex CDot11csNodeIndex,
cDot11csStatusAdminStatus INTEGER,
cDot11csStatusOperStatus INTEGER,
cDot11csStatusChangeTimeStamp TimeStamp,
cDot11csStatusAdvtInterval TimeInterval,
cDot11csStatusInRegistrations Counter32,
cDot11csStatusInDeRegistrations Counter32,
cDot11csStatusCurrentlyRegisteredIns Gauge32,
cDot11csStatusSentAdvts Counter32}cDot11csStatusNodeIndex OBJECT-TYPESYNTAX CDot11csNodeIndex
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object uniquely identifies an active wireless
service entity. For an active WDS entity, this
object holds the same value as the object
cDot11csWdsInstanceNodeIndex in
cDot11csWdsInstanceTable.
For a WNS entity, this will hold a value of type
CDot11csNodeIndex. "::={ cDot11csStatusEntry 1}
cDot11csStatusAdminStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The desired status of the services offered by this
entity to its descendants. This has a default value
of 'up' whenever a row is created by the agent in
this table. Setting this to 'down'
disables the services provided by this entity to its
descendants. The agent sets this value to 'down' if
the entity couldn't offer the services due to
failures detected in the underlying interface this
entity is bound to. "::={ cDot11csStatusEntry 2}cDot11csStatusOperStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2)
}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current operational status of the wireless
services provided by this entity. The agent sets the
value of this object whenever the administrative
status value is modified either through explicit
management action or by detecting failures in the
functioning of the wireless service entity. "::={ cDot11csStatusEntry 3}cDot11csStatusChangeTimeStamp OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of sysUpTime at the time a state transition
occurs in cDot11csStatusOperStatus. "::={ cDot11csStatusEntry 4}cDot11csStatusAdvtInterval OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-only
STATUScurrentDESCRIPTION"This object indicates the time interval between
transmission of advertisement messages. "::={ cDot11csStatusEntry 5}cDot11csStatusInRegistrations OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of descendant infrastructure nodes
registered with this entity since the last reboot of
this device. "::={ cDot11csStatusEntry 6}cDot11csStatusInDeRegistrations OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of descendant infrastructure nodes
de-registered with this entity since the last reboot
of this device. "::={ cDot11csStatusEntry 7}
cDot11csStatusCurrentlyRegisteredIns OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of descendant infrastructure nodes
currently registered with this entity since the
operational status of this entity last changed to
'up'. "::={ cDot11csStatusEntry 8}cDot11csStatusSentAdvts OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of advertisement messages sent by this
entity since the last reboot of this device. "::={ cDot11csStatusEntry 9}cDot11csElectedAsWdsEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"This object controls the generation of the
cDot11csElectedAsWdsEnable notification.
If the value of this object is set to 'true', the
agent shall send the cDot11csElectedAsWds
notification to the intended trap recipients. "DEFVAL{ false }::={ cDot11csConfigGlobal 19}cDot11csInRegisteredWithWsEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object controls the generation of the
cDot11csInRegisteredWithWs notification.
If the value of this object is set to 'true', the
agent shall send the cDot11csInRegisteredWithWs
notification to the intended trap recipients. "DEFVAL{ false }::={ cDot11csConfigGlobal 20}cDot11csInDeRegisteredWithWsEnable OBJECT-TYPESYNTAXTruthValue
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object controls the generation of the
cDot11csInDeRegisteredWithWs notification.
If the value of this object is set to 'true', the
agent shall send the cDot11csInDeRegisteredWithWs
notification to the intended trap recipients. "DEFVAL{ false }::={ cDot11csConfigGlobal 21}--*************************************************************
-- cDot11csDescendantInTable
--*************************************************************cDot11csDescendantInTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11csDescendantInEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the list of the descendant
nodes currently registered with this
infrastructure node.
This table has an expansion dependent relationship
on the cDot11csStatusTable, relating one or more
descendants with a wireless service entity and holds
entries carrying information about the descendants of
a particular wireless service entity identified by
cDot11csStatusNodeIndex in cDot11csStatusTable. "::={ cDot11csDescendantIn 1}cDot11csDescendantInEntry OBJECT-TYPESYNTAX CDot11csDescendantInEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry represents an descendant infrastructure
node that is currently registered with the WS entity
identified by cDot11csStatusNodeIndex.
A row is added to the table by the agent when a
descendant infrastructure node registers with the
entity identified by the object
cDot11csStatusNodeIndex.
A row is deleted from this table by the agent when
a descendant loses its registration with the wireless
service entity identified by cDot11csStatusNodeIndex.
Loss of registration occurs if the WS entity
identified by cDot11csStatusNodeIndex loses contact
with a particular descendant identified by
cDot11csDescendantInId. Also, all the entries in
this table are deleted if the entry for the wireless
service entity is deleted from cDot11csStatusTable. "INDEX{ cDot11csStatusNodeIndex,
cDot11csDescendantInId }::={ cDot11csDescendantInTable 1}
CDot11csDescendantInEntry ::=SEQUENCE{
cDot11csDescendantInId MacAddress,
cDot11csDescendantInType INTEGER,
cDot11csDescendantInIpAddressType InetAddressType,
cDot11csDescendantInIpAddress InetAddress,
cDot11csDescendantInRegistrationAge TimeInterval,
cDot11csDescendantInCtkRefreshes Counter32,
cDot11csDescendantInNskExpiryTimeOut TimeInterval}cDot11csDescendantInId OBJECT-TYPESYNTAXMacAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The MAC address of this descendant IN. "::={ cDot11csDescendantInEntry 1}cDot11csDescendantInType OBJECT-TYPESYNTAXINTEGER{ap(1),wds(2),wns(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the type of the
infrastructure node.
'ap' - Access Point.
'wds' - Wireless Domain Services Entity.
'wns' - Wireless Network Services Entity. "::={ cDot11csDescendantInEntry 2}cDot11csDescendantInIpAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Represents the type of Internet address stored in
cDot11csDescendantInIpAddressType. "::={ cDot11csDescendantInEntry 3}cDot11csDescendantInIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP address of the descendant IN. "::={ cDot11csDescendantInEntry 4}cDot11csDescendantInRegistrationAge OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time elapsed since this infrastructure node has
registered with the WS entity identified by
cDot11csStatusNodeIndex. "::={ cDot11csDescendantInEntry 5}cDot11csDescendantInCtkRefreshes OBJECT-TYPE
SYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of context transfer key refreshes done
by this infrastructure node with the WS entity
identified by cDot11csStatusNodeIndex. "::={ cDot11csDescendantInEntry 6}cDot11csDescendantInNskExpiryTimeOut OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The network session key timeout value assigned by the
AAA server to this infrastructure node. "::={ cDot11csDescendantInEntry 7}--********************************************************************
--* cDot11csMn Group Parameters
--********************************************************************cDot11csMnContextTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11csMnContextEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table has an expansion dependent relationship
on the cDot11csStatusTable, relating one or more
mobile clients with a wireless service entity and
holds entries carrying information about the mobile
nodes registered with the entity identified by
cDot11csStatusNodeIndex in cDot11csStatusTable. "::={ cDot11csMn 1}cDot11csMnContextEntry OBJECT-TYPESYNTAX CDot11csMnContextEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry represents a mobile node that is currently
registered with the entity identified by
cDot11csStatusNodeIndex.
A row is added to the table by the agent when a
mobile node registers with the entity identified by
the object cDot11csStatusNodeIndex.
A row is deleted from this table by the agent when
a mobile node loses its registration with the entity
identified by cDot11csStatusNodeIndex. Loss of
registration occurs when the mobile node roams from
one subnet to another. Also, all the entries in
this table are deleted if the entry for the entity
is deleted from cDot11csStatusTable. "INDEX{ cDot11csStatusNodeIndex,
cDot11csMnContextId }::={ cDot11csMnContextTable 1}
CDot11csMnContextEntry ::=SEQUENCE{
cDot11csMnContextId MacAddress,
cDot11csMnContextSsid OCTETSTRING,
cDot11csMnContextSystemName SnmpAdminString,
cDot11csMnContextUserId SnmpAdminString,
cDot11csMnContextIpAddressType InetAddressType,
cDot11csMnContextIpAddress InetAddress,
cDot11csMnParentInIpAddress InetAddress,
cDot11csMnRegistrationAge TimeInterval,
cDot11csMnNskExpiryTimeOut TimeInterval,
cDot11csMnCipherNegotiated INTEGER
}cDot11csMnContextId OBJECT-TYPESYNTAXMacAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The MAC address of this mobile node. "::={ cDot11csMnContextEntry 1}cDot11csMnContextSsid OBJECT-TYPESYNTAXOCTETSTRING(SIZE(1..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Service Set Identifier of this mobile node. "::={ cDot11csMnContextEntry 2}cDot11csMnContextSystemName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The hostname by which the mobile node is uniquely
identified in the network. "::={ cDot11csMnContextEntry 3}cDot11csMnContextUserId OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of this mobile node's user. "::={ cDot11csMnContextEntry 4}cDot11csMnContextIpAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the type of Internet addresses stored in
cDot11csMnContextIpAddress and
cDot11csMnParentInIpAddress. "::={ cDot11csMnContextEntry 5}cDot11csMnContextIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP address of this mobile node. "::={ cDot11csMnContextEntry 6}cDot11csMnParentInIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP address of the parent infrastructure node
of this mobile node. "::={ cDot11csMnContextEntry 7}cDot11csMnRegistrationAge OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The time elapsed since this mobile node has
registered with the wireless service entity
identified by cDot11csStatusNodeIndex in hundredths
of a second. This object is not applicable if the
entity identified by cDot11csStatusNodeIndex is not
a MN Authenticator. "::={ cDot11csMnContextEntry 8}cDot11csMnNskExpiryTimeOut OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The network session timeout value assigned by the
AAA server to this mobile node in hundredths of a
of a second. This object is not applicable if the
entity identified by cDot11csStatusNodeIndex is not
a MN Authenticator. "::={ cDot11csMnContextEntry 9}cDot11csMnCipherNegotiated OBJECT-TYPESYNTAXINTEGER{none(0),
wep(1),tkip(2),ckip(3),other(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of the cipher negotiated for privacy and
authenticity. The various types are described as
follows.
none - No protocol in use for privacy and
authenticity.
wep - Wired Equivalent Privacy.
tkip - Temporal Key Integrity Protocol.
ckip - A proprietary implementation similar to
TKIP.
other - vendor specific implementations. "::={ cDot11csMnContextEntry 10}--********************************************************************
--* Wireless Services MIB Notification parameters
--********************************************************************cDot11csElectedAsWds NOTIFICATION-TYPE
OBJECTS{ ifPhysAddress }STATUScurrentDESCRIPTION"This notification is sent by the WDS entity that
has got elected to offer Wireless Domain Services."::={ ciscoDot11csMIBNotifications 1}cDot11csInRegisteredWithWs NOTIFICATION-TYPEOBJECTS{
cDot11csDescendantInIpAddressType,
cDot11csDescendantInIpAddress,
ifPhysAddress
}STATUScurrentDESCRIPTION"This notification is sent by the wireless service
entity upon an infrastructure node getting registered
with that wireless service entity. The notification
carries the MAC address of the wireless service
entity. "::={ ciscoDot11csMIBNotifications 2}cDot11csInDeRegisteredWithWs NOTIFICATION-TYPEOBJECTS{
cDot11csDescendantInIpAddressType,
cDot11csDescendantInIpAddress,
ifPhysAddress
}STATUScurrentDESCRIPTION"This notification is sent by the wireless service
entity upon an infrastructure node getting
deregistered with that wireless service entity. The
notification carries the MAC address of the wireless
service entity. "::={ ciscoDot11csMIBNotifications 3}--********************************************************************
--* End of Notification objects
--********************************************************************--********************************************************************
-- Conformance information
--********************************************************************ciscoDot11csMIBCompliances OBJECTIDENTIFIER::={ ciscoDot11csMIBConformance 1}ciscoDot11csMIBGroups OBJECTIDENTIFIER::={ ciscoDot11csMIBConformance 2}--********************************************************************
--* Compliance statements
--********************************************************************ciscoDot11csCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for the SNMP entities that
implement Wireless Domain Services and Wireless
Network Services. "MODULEMANDATORY-GROUPS{
cDot11csConfigGlobalGroup,
cDot11csDescendantInGroup,
cDot11csMnGroup,
cDot11csMIBNotifGroup
}OBJECT cDot11csParentNodeIpAddressType
SYNTAXINTEGER{
ipv4(1)}DESCRIPTION"An implementation is only required to support
one of the six enumerated values of the
InetAddressType textual convention,
specifically, 'ipv4'. "OBJECT cDot11csPrimaryRootNodeAddrType
SYNTAXINTEGER{
ipv4(1)}DESCRIPTION"An implementation is only required to support
one of the six enumerated values of the
InetAddressType textual convention,
specifically, 'ipv4'. "OBJECT cDot11csSecondaryRootNodeAddrType
SYNTAXINTEGER{
ipv4(1)}DESCRIPTION"An implementation is only required to support
one of the six enumerated values of the
InetAddressType textual convention,
specifically, 'ipv4'. "OBJECT cDot11csCurrentRootNodeAddrType
SYNTAXINTEGER{
ipv4(1)}DESCRIPTION"An implementation is only required to support
one of the six enumerated values of the
InetAddressType textual convention,
specifically, 'ipv4'. "OBJECT cDot11csMnaIpAddressType
SYNTAXINTEGER{
ipv4(1)}DESCRIPTION"An implementation is only required to support
one of the five enumerated values of the
InetAddressType textual convention,
specifically, 'ipv4'. "OBJECT cDot11csDescendantInIpAddressType
SYNTAXINTEGER{
ipv4(1)}DESCRIPTION"An implementation is only required to support
one of the five enumerated values of the
InetAddressType textual convention,
specifically, 'ipv4'. "OBJECT cDot11csMnContextIpAddressType
SYNTAXINTEGER{
ipv4(1)}DESCRIPTION"An implementation is only required to support
one of the five enumerated values of the
InetAddressType textual convention,
specifically, 'ipv4'. "OBJECT cDot11csWnsRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"An implementation is only required to support
three of the six enumerated values of the
RowStatus textual convention, specifically,
'active', 'createAndGo' and 'destroy'. "OBJECT cDot11csWnmConfigRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"An implementation is only required to support
three of the six enumerated values of the
RowStatus textual convention, specifically,
'active', 'createAndGo' and 'destroy'. "OBJECT cDot11csWdsInstanceRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"An implementation is only required to support
three of the six enumerated values of the
RowStatus textual convention, specifically,
'active', 'createAndGo' and 'destroy'. "::={ ciscoDot11csMIBCompliances 1}--********************************************************************
--* Units of conformance
--********************************************************************cDot11csConfigGlobalGroup OBJECT-GROUPOBJECTS{
cDot11csServiceType,
cDot11csParentNodeIpAddressType,
cDot11csParentNodeIpAddress,
cDot11csPrimaryRootNodeAddrType,
cDot11csPrimaryRootNodeAddr,
cDot11csSecondaryRootNodeAddrType,
cDot11csSecondaryRootNodeAddr,
cDot11csCurrentRootNodeAddrType,
cDot11csCurrentRootNodeAddr,
cDot11csWnsEntityName,
cDot11csMnaIpAddressType,
cDot11csMnaIpAddress,
cDot11csIsRootNode,
cDot11csNodeOperationMode,
cDot11csWnsSubnetMask,
cDot11csWnsRowStatus,
cDot11csWnmConfigAuthenState,
cDot11csWnmConfigRowStatus,
cDot11csWdsInstanceNodeIndex,
cDot11csWdsInstanceInterfaceIndex,
cDot11csWdsInstancePriority,
cDot11csWdsInstanceState,
cDot11csWdsInstanceRowStatus,
cDot11csStatusAdminStatus,
cDot11csStatusOperStatus,
cDot11csStatusChangeTimeStamp,
cDot11csStatusAdvtInterval,
cDot11csStatusInRegistrations,
cDot11csStatusInDeRegistrations,
cDot11csStatusCurrentlyRegisteredIns,
cDot11csStatusSentAdvts,
cDot11csElectedAsWdsEnable,
cDot11csInRegisteredWithWsEnable,
cDot11csInDeRegisteredWithWsEnable
}STATUScurrentDESCRIPTION"This collection of objects provide information about
the wireless services configured in a device and
their current status. "::={ ciscoDot11csMIBGroups 1}cDot11csDescendantInGroup OBJECT-GROUPOBJECTS{
cDot11csDescendantInType,
cDot11csDescendantInIpAddressType,
cDot11csDescendantInIpAddress,
cDot11csDescendantInRegistrationAge,
cDot11csDescendantInCtkRefreshes,
cDot11csDescendantInNskExpiryTimeOut
}STATUScurrentDESCRIPTION"A collection of objects that contain information
about all the descendant infrastructure nodes of
a wireless service entity. "::={ ciscoDot11csMIBGroups 2}cDot11csMnGroup OBJECT-GROUPOBJECTS{
cDot11csMnContextSsid,
cDot11csMnContextSystemName,
cDot11csMnContextUserId,
cDot11csMnContextIpAddressType,
cDot11csMnContextIpAddress,
cDot11csMnParentInIpAddress,
cDot11csMnRegistrationAge,
cDot11csMnNskExpiryTimeOut,
cDot11csMnCipherNegotiated
}STATUScurrentDESCRIPTION"The collection of objects that provide mobile
node context information cached in a wireless
service entity. "::={ ciscoDot11csMIBGroups 3}cDot11csMIBNotifGroup NOTIFICATION-GROUPNOTIFICATIONS{
cDot11csElectedAsWds,
cDot11csInRegisteredWithWs,
cDot11csInDeRegisteredWithWs
}STATUScurrentDESCRIPTION"A collection of objects providing notifications
related to election of WDS, registration and
deregistration of infrastructure nodes with entities
offering wireless services. "::={ ciscoDot11csMIBGroups 4}--********************************************************************
--* End of units of conformance
--********************************************************************END